🔥 Annual Fire Department Door Inspections – What You Need to Know

Montreal Fire inspection

🚪🔍 Door Inspection Services – Fire Safety & Compliance

Attention building owners and managers! 🏢🔥 The fire department requires yearly door inspections to ensure safety and compliance. At Serrurier Shay Locksmith, we specialize in inspecting and fixing all types of doors so you pass your inspections without stress.

✅ What We Check During Door Inspections:

  1. Door Latching Issues ⚠️

    • Doors must latch properly.

    • Doors that close too fast or too slow can be unsafe.

  2. Obstructions & Misalignment 🛑

    • Doors that don’t fully close because the closer arm stops it or it touches the frame.

  3. Fire-Rated Plates 🔥

    • Side doors with fire-rated plates may have paint or debris – these must be cleaned.

  4. Push Paddles & Exit Devices 🖐️

    • Main doors: push paddles must work properly.

    • Exit devices: push bars must retract 100% when pressed.

  5. Door Closers 💧

    • Check for oil leaks or malfunctioning closers.

  6. Electric Strikes & Strike Plates ⚡

    • Missing or worn-out parts must be replaced.

  7. Door Hinges 🔩

    • Missing or worn-out hinges can prevent proper door function.

  8. Door Handles & Hardware 🖐️

    • Missing handles or broken parts must be replaced.

  9. Exit Door Requirements 🚪

    • Exit doors must remain clear at all times.

    • Only permissible locks: removable weldable bar (common in warehouse doors).

    • No additional locks allowed that prevent quick exit!

⚡ How to Make Inspections Faster:

To save time and labor, we recommend clients:

  • Mark all doors with yellow notes or tape. 🟨

  • Mark floor locations and door numbers.

  • Send us a diagram if you cannot be on-site. 🗺️

  • Best option: Be on-site with us to guide and show us all doors. 🧑‍🔧

If the client is not on-site or markings are missing, labor may take longer.

🛠️ Step-by-Step Process:

  1. Walkthrough of all doors. 🚶‍♂️

  2. Check latches, closers, push paddles, hinges, handles, electric strikes, and exit devices. 🔧

  3. Clean fire-rated plates and fix any paint obstructions. 🖌️

  4. Repair or replace defective hardware. ⚙️

  5. Verify exit paths are clear and compliant. ✅

📧 Contact Us: info@serruriermontreal.com
📞 Call Us: 514-836-9097

Ensure your building is fire-safe and inspection-ready! 🔥🚪💪